Grit rolling type
FC series
For use with systems running Microsoft® Windows® 7 or 10 AND equipped with AMD Radeon™ graphics, AMD Radeon Pro graphics, or AMD processors with Radeon graphics. Download the Combined Chipset and Radeon Graphics driver installer and run it directly onto the system you want to update. This installer will download and install only. And to help you take your drive to the next level, an Advanced Twin-Clutch AWD system — available on RS — can independently direct torque to the wheel with the best traction for even more confidence and control. EPA-estimated 27 MPG highway (FWD) 193 horsepower and 188 lb.-ft.
Cutting Plotters | Drivers (*1)(*2) | Firmware | Softwares | Manual |
---|---|---|---|---|
FC9000 | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 | Ver.1.27NEW | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW | Setup manual (English) |
User manual (English) | ||||
FC8600 | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 [Windows 7] 32-bit Edition Ver.3.80 64-bit Edition Ver.3.80 | Ver.3.30 NEW | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Windows] Ver.2.2.1252 Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW Cutting Master 3 (*3) [Windows] Ver.2.2.1252 Cutting Master 3 (*3) [Mac] Ver.2.2.1252 Cutting Master 2 (*3) [Windows 8.1/7] Ver.2.00 Cutting Master 2 (*3) [Mac OS X 10.4~10.10] Ver.1.99 Cutting Plotter Controller [Windows] Ver.1.50B | Setup manual (English) |
User manual (English) | ||||
Cutting Plotter Controller manual (English) | ||||
FC8000 | [Windows 10/8.1/7] 32-bit Edition Ver.3.50 64-bit Edition Ver.3.50 | Ver.3.50 | Graphtec Pro Studio/Plus [Windows] Ver.2.21 Graphtec Studio [Windows] Ver.2.2.1252 Graphtec Studio [Mac] Ver.2.2.1267 Cutting Master 4 [Windows] Ver.2.20 Cutting Master 4 [Mac] Ver.2.10 Cutting Master 3 (*3) [Windows] Ver.2.2.1252 Cutting Master 3 (*3) [Mac] Ver.2.2.1252 Cutting Master 2 [Windows 8.1/7] Ver.2.00 Cutting Master 2 (*3) [Mac OS X 10.4~10.10] Ver.1.99 Cutting Plotter Controller [Windows] Ver.1.50B | - |
FC7000Mk2 | [Windows 7] 32-bit Edition Ver.3.00 64-bit Edition Ver.3.00 | - | Cutting Plotter Controller [Windows] Ver.2.20B | - |
FC7000 | [Windows 7] 32-bit Edition Ver.3.00 64-bit Edition Ver.3.00 | - | Cutting Plotter Controller [Windows] Ver.2.20B | - |
FC5100 | [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | - | - | - |
Legacy PROWIN32 and PROWIN64 download packages provide PROSet, driver, ANS, FCoE, and DCB support for Windows 7. and Windows Server 2008 R2. Regular webpacks provide Intel® PROSet support for operating systems Windows 8.1., Windows Server 2012., Windows Server 2012 R2., Windows® 10, Windows Server 2016., or newer supported operating systems. Free drivers for Cherry Keyboards. Cherry Windows drivers will help to eliminate failures and adjust the operation of your device. D33075 graphics card. Notebook driver-d-link-dlg10028c driver-teclado-cherry-rs-6600-usb e1-q5wph e93839-motherboard-specs epson-tmp2. Article Library. Stay up to date with the latest developments, trends, and insights driving industrial networking and transforming the world we live in. Contact Moxa Support. Still need assistance with your Moxa product? Get help and save time by initiating an online support request and we will connect you to an expert.
CE series
Cutting Plotters | Drivers (*1)(*2) | Firmware | Softwares | Manual |
---|---|---|---|---|
CE7000 | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 | Ver.1.22NEW | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW | Setup manual (English) |
User manual (English) | ||||
CE7000-130AP | [Windows 10/8.1] 32-bit Edition Ver.10.30 64-bit Edition Ver.10.30 | Ver.1.23NEW | - | Setup manual (English) |
User manual (English) | ||||
F-Mark2 for CE7000 | - | Please update CE7000 firmware to the latest version. | iMark Plus [Windows] Ver.9.4.0HNEW * Notice of System Requirements | Software manual (English) |
Setup user's manual (English) | ||||
CE LITE-50 | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 | Ver.1.20 | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW Silhouette Studio [Windows 32bit] Ver.4.3.284 Silhouette Studio [Windows 64bit] Ver.4.3.284 Silhouette Studio [Mac] Ver.4.3.356 | Setup manual (10 Languages) |
User manual (10 Languages) | ||||
Test chart of registration mark | ||||
F-Mark for CE6000 | - | Please update CE6000/PLUS firmware to the latest version. | iMark [Windows] Ver.8.1.6H | Software manual (English) |
Setup user's manual (English) | ||||
FAQ (English) FAQ (Chinese) / 常见的问题 | ||||
CE6000 PLUS | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 [Windows 7] 32-bit Edition Ver.3.80 64-bit Edition Ver.3.80 | Ver.1.21 | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW Cutting Plotter Controller [Windows 10/8.1/7] Ver.1.51 | Setup manual (English) |
User manual (English) | ||||
CE6000 | [Windows 10/8.1] 32-bit Edition Ver.4.00 64-bit Edition Ver.4.00 [Windows 7] 32-bit Edition Ver.3.80 64-bit Edition Ver.3.80 | Ver.2.61 | Graphtec Pro Studio/Plus [Windows] Ver.3.40NEW Graphtec Studio [Windows] Ver.2.2.1252 Graphtec Studio [Mac] Ver.3.0.035 Cutting Master 4 [Windows] Ver.3.80 Cutting Master 4 [Mac] Ver.4.00NEW Cutting Master 3 (*3) [Windows] Ver.2.2.1252 Cutting Master 3 (*3) [Mac] Ver.2.2.1252 Cutting Master 2 (*3) [Windows 8.1/7] Ver.2.00 Cutting Master 2 (*3) [Mac OS X 10.4~10.10] Ver.1.99 Cutting Plotter Controller [Windows] Ver.1.40B | Setup manual (English) |
User manual (English) | ||||
CE6000-120AP | [Windows 10/8.1] 32-bit Edition Ver.10.30 64-bit Edition Ver.10.30 [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | Ver.2.00 | - | Setup manual (English) |
User manual (English) | ||||
CE5000 | [Windows 10/8.1/7] 32-bit Edition Ver.3.50 64-bit Edition Ver.3.50 | Current firmware is version 5.00 or later Ver.6.40 Current firmware is previous of version 3.80 Ver.4.00 | Graphtec Pro Studio/Plus [Windows] Ver.2.10 Graphtec Studio [Windows] Ver.2.2.1252 Graphtec Studio [Mac] Ver.2.2.1267 Cutting Master 4 [Windows] Ver.2.10 Cutting Master 4 [Mac] Ver.2.10 Cutting Master 3 (*3) [Windows] Ver.2.2.1252 Cutting Master 3 (*3) [Mac] Ver.2.2.1252 Cutting Master 2 (*3) [Windows 8.1/7] Ver.2.00 Cutting Master 2 (*3) [Mac OS X 10.4~10.10] Ver.1.99 ROBO Master PRO [Windows] Ver.4.60 Cutting Plotter Controller [Windows] Ver.2.20B | - |
CE5000-120AP | [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | - | - | - |
CE3000Mk2 | [Windows 7] 32-bit Edition Ver.3.00 64-bit Edition Ver.3.00 | - | - | - |
CE3000-120AP | [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | - | - | - |
CE3000 | [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | - | - | - |
CE2000 | [Windows 7] 32-bit Edition Ver.10.20 64-bit Edition Ver.10.20 | - | - | - |
- *
- : Operation is not guaranteed after warranty period is expired.
- (*1)
- Will run in 32-bit compatibility mode on 64-bit Windows OS.
- (*2)
- Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.
- (*3)
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated.
If you are developing on Windows and want to connect a device for testing,then you need to install the appropriate USB driver. This pageprovides links to the web sites for several original equipment manufacturers (OEMs),where you can download the appropriate USB driver for your device.
If you're developing on Mac OS X or Linux, then you shouldn't need a USB driver.Instead read Using Hardware Devices.
To connect and debug with any of the Google Nexus devices using Windows, youneed to install the Google USB driver.
Install a USB driver
First, find the appropriate driver for your device from the OEM driverstable below.
Once you've downloaded your USB driver, follow the instructions below to install or upgrade thedriver, based on your version of Windows and whether you're installing for the first timeor upgrading an existing driver. Then see Using Hardware Devices forother important information about using an Android device fordevelopment.
Caution:You may make changes to android_winusb.inf
file found insideusb_driver
(for example, to add support for other devices),however, this will lead to security warnings when you install or upgrade thedriver. Making any other changes to the driver files may break the installationprocess.
Windows 10
To install the Android USB driver on Windows 10 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- From Windows Explorer, open Computer Management.
- In the Computer Management left pane, select Device Manager.
- In the Device Manager right pane, locate and expand Portable Devices or Other Devices, depending on which one you see.
- Right-click the name of the device you connected, and then select Update Driver Software.
- In the Hardware Update wizard, select Browse my computer for driver software and click Next.
- Click Browse and then locate the USB driver folder. For example, the Google USB Driver is located in
android_sdkextrasgoogleusb_driver
. - Click Next to install the driver.
Windows 8.1
To install the Android USB driver on Windows 8.1 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- Access search, as follows:
Touch screen: On your computer, swipe in from the right edge of the screen and tap Search.
Using a mouse: Point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.
- In the search box, type into and then click Device Manager.
- Double-click the device category, and then double-click the device you want.
- Click the Driver tab, click Update Driver, and follow the instructions.
Windows 7
To install the Android USB driver on Windows 7 for the first time, do the following:
- Connect your Android device to your computer's USB port.
- Right-click on Computer from your desktop or Windows Explorer, and select Manage.
- Select Devices in the left pane.
- Locate and expand Other device in the right pane.
- Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch the Hardware Update Wizard.
- Select Browse my computer for driver software and click Next.
- Click Browse and locate the USB driver folder. (The Google USBDriver is located in
android_sdkextrasgoogleusb_driver
.) - Click Next to install the driver.
Or, to upgrade an existing Android USB driver on Windows 7 and higher with the newdriver:
- Connect your Android device to your computer's USB port.
- Right-click on Computer from your desktop or Windows Explorer, and select Manage.
- Select Device Manager in the left pane of the Computer Management window.
- Locate and expand Android Phone in the right pane.
- Right-click on Android Composite ADB Interface and select Update Driver. This will launch the Hardware Update Wizard.
- Select Install from a list or specific location and click Next.
- Select Search for the best driver in these locations; uncheckSearch removable media; and check Include this location in thesearch.
- Click Browse and locate the USB driver folder. (The Google USBDriver is located in
android_sdkextrasgoogleusb_driver
.) - Click Next to upgrade the driver.
Usb Driver
Get OEM drivers
Usb Driver Windows 7 Free Download
OEM | Driver URL |
---|---|
Acer | http://www.acer.com/worldwide/support/ |
alcatel one touch | http://www.alcatelonetouch.com/global-en/support/ |
Asus | https://www.asus.com/support/Download-Center/ |
Blackberry | https://swdownloads.blackberry.com/Downloads/entry.do?code=4EE0932F46276313B51570F46266A608 |
Dell | http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs&~ck=anavml |
Fujitsu | http://www.fmworld.net/product/phone/sp/android/develop/ |
HTC | http://www.htc.com/support |
Huawei | http://consumer.huawei.com/en/support/index.htm |
Intel | http://www.intel.com/software/android |
Kyocera | http://www.kyocera-wireless.com/support/phone_drivers.htm |
Lenovo | http://support.lenovo.com/us/en/GlobalProductSelector |
LGE | http://www.lg.com/us/support/software-firmware |
Motorola | https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/ |
MTK | http://online.mediatek.com/Public%20Documents/MTK_Android_USB_Driver.zip (ZIP download) |
Samsung | http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows |
Sharp | http://k-tai.sharp.co.jp/support/ |
Sony Mobile Communications | http://developer.sonymobile.com/downloads/drivers/ |
Toshiba | http://support.toshiba.com/sscontent?docId=4001814 |
Xiaomi | http://www.xiaomi.com/c/driver/index.html |
ZTE | http://support.zte.com.cn/support/news/NewsDetail.aspx?newsId=1000442 |
Mtp Usb Driver Windows 7
If you don't see a link for the manufacturer of your device here, go to the support section of the manufacturer's website and search for USB driver downloads for your device.